Ghines Hydro - The Mud Separator

Hydro is a simple, effective and cost-competitive solution for the mud pit cleaning where classical decanting systems are used. Separation pit systems only work effectively when pits are kept clean. Hydro does the work for you sparing your time and freeing you from costly periodic cleaning. Easy to install, no masonry required! How it works The operating principle is really simple: a submerged slurry pump conveys muddy water into an hydrocyclone separator. The hydrocyclone has two axially aligned discharge exits: a small one on the bottom and a bigger one on the top. Once the muddy water is inside the cyclone, the centrifugal force runs counter to the liquid resistance, thus the bigger mud particles are pulled around the cyclone cone, creating an underflow discharging through the bottom end into the bag. Clear water overflow gets out of top exit and goes back to the decanting pit.
Our Price: £3,415.00 (Delivery Cost: £220.00)
Price Excludes VAT

Share This Product:

Hydrò is a simple, effective and cost-competitive solution for the mud pit cleaning where classical decanting
systems are used. Separation pit systems only work effectively when pits are kept clean. Hydrò does the work for
you sparing your time and freeing you from costly periodic cleaning.
Easy to install – no masonry required!
How it works
The operating principle is really simple: a submerged slurry pump conveys muddy water into an hydrocyclone
separator. The hydrocyclone has two axially aligned discharge exits: a small one on the bottom and a bigger one
on the top.
Once the muddy water is inside the cyclone, the centrifugal force runs counter to the liquid resistance, thus the
bigger mud particles are pulled around the cyclone cone, creating an underflow discharging through the bottom
end into the bag. Clear water overflow gets out of top exit and goes back to the decanting pit.

Click the play icon on any available videos to play.

 

 

Operating dimensions

1200 x 500 x 2100 mm

Maximum particle

6 mm

Stainless steel pump

200 l/m – 0,6 bar - Vortex 230V 50Hz 1 HP

Bag holder dimensions

900 x 900 x 1250 mm

Machine packing

910 x 640 x 950 mm - 61 kg

Bag holder packing

1300 x 310 x 470 mm - 35 kg